ITeaduino Plus A20

Marca:
Quick OverviewIteaduino Plus is an open source ARM development board, which is based on Allwinner A20 SoC, small size, hacker friendly, extendable and very low-cost. Compare with Raspberry Pi, it has higher performance, SATA supported and more extensi ...
80,93 €
Com IVA
Em Stock
Disponível a partir de: 2014-06-24
Referência:
MX130808014
Favorito0
Adicionar à lista de desejos
Produtos relacionados
Sem items
Descrição

Quick Overview
Iteaduino Plus is an open source ARM development board, which is based on Allwinner A20 SoC, small size, hacker friendly, extendable and very low-cost. Compare with Raspberry Pi, it has higher performance, SATA supported and more extension interfaces.


Details

Iteaduino Plus is a Cost - effective DIY ARM platfrom. If you plan to assemble a small computer, you can try using this small ARM platform. It supports Ubuntu and other Linux distributions,you could use it like an ordinary computer. At the same time, the platform also have many extension interfaces, so you can make it as a brain for all your DIY project.

Iteaduino Plus is made up of Core and Baseboard. Core is the smallest system based on ARM, and it forms a highly extendable Mini PC together with Baseboard. Core and Baseboard are detachable. A relatively high-speed circuit is integrated in Core, which is quite difficult to design, and users can develop Baseboard on their own according to their needs.

Feature

CPU Dual-Core ARM Cortex-A7
GPU Mali 400 MP
DDR3 RAM 1Gbit
4G NAND FLASH
Split CORE and Baseboard design
Break out sufficient GPIO’s
Compatible with RPI 26pin interface
Support Grove Electronic brick
Support Foca directly for serial debug


Specifications
PCB size 109.22X76.2X1.2mm
Indicator 3V3 /5V
Interface HDMI/SATA/MICROSD/USB-AX2/MICROUSB/MINIUSB/
RJ45/3.5MM sonic socketX2/2*36 2.54mm socketX2
Working voltage 5V DC (6.3VDC MAX)
Working voltage at I/O port 3V3

Note:

As power supply from USB port of PC can only support the system working properly under low load, an external AC ~ DC power supply is recommended to ensure system working normally under high load.
When A20 Core works under large load, voltage loss on USB power cable should be considered, as there might be abnormities such as program running away due to insufficient input voltage. To ensure a good power supply, we customized a batch of high-quality USB power cable, and the internal resistance is controlled to about 400 ohm. We recommend using the USB power cable supplied by ITEAD to ensure sufficient supply voltage, do not use power cables of poor quality.


Hardware

For detailed dimension and specifications, please find in the appendix in file "DS_IM130808010"

Schematic of A10/20 Core
Schematic of Iteaduino Plus baseboard
Cadence source file of Iteaduino Plus baseboard
Pinmap of A10/20 Core
Pinmap of Iteaduino Plus baseboard

You can find the documents above in the "DOWNLOAD" label on this page. The hardware of Baseboard and plugs are opensource , for more information, please visit itead.cc

Iteaduino Plus A20 Interface

1*10/100M Ethernet
1*SATA with External Power Jack
1*Micro-SD
1*HDMI
4*36pin GPIO
2*USB HOST
1*Mini USB OTG
1*Micro USB (with 5V power supply)
1*FOCA
4*Grove
1*26pin Rasberry Pi compatible interface
1*3.5mm Audio Input
1*3.5mm Audio Output


Packing List

1 x A20 Core
1 x Iteaduino Plus baseboard
1 x protective case
1 x power cable
1 x pry stick for core
1 x SATA cable
1 x Heat sink

Dados do produto
MX130808014
Opiniões
Sem comentários
16 outros produtos na mesma categoria:

Código QR

Opções

Clique para mais produtos.
Não foram encontrados produtos.

Crie uma conta gratuita para gravar produtos favoritos.

Iniciar Sessão

Criar uma conta gratuita para criar listas de desejos.

Iniciar Sessão