4~20mA Sensor Brick is an electronic brick module that can be used to test electronic current loop from 4mA to 20mA and support type2,3,4 current output. With a 5V to 24V DC-DC power boost convertor, its max current output can be 150mA, which can be for equipment use.
4~20mA Sensor Brick is an electronic brick module that can be used to test electronic current loop from 4mA to 20mA and support type2,3,4 current output. With a 5V to 24V DC-DC power boost convertor, its max current output can be 150mA, which can be for equipment use.
| PCB size | 40.6mm X 29mm X 1.6mm |
|---|---|
| Power supply | 5V DC |
| Compatible interfaces | 2.54 4-pin interface and 4-pin Grove interface(1) |
| Parameter | Min. | Typical | Max. | Unit |
|---|---|---|---|---|
| Power supply | 4.5 | 5 | 5.5 | VDC |
| Input measurement current | 4 | - | 20 | mA |
| Output Current(DCDC) | - | - | 150 | mA |
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.
For technical support, please open a ticket on Itead Support System.
| Link Wiki | N/A |
|---|---|
| Brick Interface | 4PIN Parallel |
| Brick Power Supply | 5V |
| Board Size | 40.6mm X 29mm X 1.6mm |
| LED Color | Blue |
| Weight | 15.0000 |
